Place the metal edge of your tape measure on the floor at the bottom of the opening but inside the frame. Carefully pull up the measuring tape until you reach the top. Write down the number. The standard bifold door requires 80.75 inches.
Contact UsTake three measurements of the width of the opening — at the top, the middle and the bottom. Then take three measurements of the height of the opening — one on each side and one in the middle. Take the smallest numbers from both sets of measurements and subtract a half-inch from each to get your final width and height.
Contact UsHow to measure your bifold doors Getting good quality bifolds is essential if you’re to benefit from their reliability and security. But that’s only half of the story. When we install bifolds, we know they’ll fit snugly into the frame because we’ve taken exactly the right measurements beforehand.
Contact Us15/1/2021 · Origin has a bifold door size calculator that details the standard manufacturer maximum width for bifold door panels, which is 420 to 780 inches, or 35 to 65 feet. The minimum width is 16 inches
Contact UsMaximum width of one door panel The maximum width of a single door leaf can range from 35 to 50 inches. On Origin doors, a door panel can be up to 48 inches wide. In the US, bi-fold doors need to pass High Velocity Hurricane Zone tests, which are designed to test the doors’ ability to withstand hurricane conditions.
Contact UsMeasure the length and width of the finished opening. Step 2 Select a bifold door which is approximately 1 inch less than the width of your closet opening and 1 to 2 inches less than the height of your closet opening. Combine the widths of the bifold doors if you are installing two.
Contact UsWrite down the smallest measurement. 4. Measure vertically at the left, right and centre of the opening. You should measure from the sub floor to the lintel above the opening.
Contact UsBifold door sizes are based on having a track at the top and a pivot bracket at the base. Generally, you need an extra 1 3/4" of height beyond the height of the door panel. The bifold doors are undercut 1" standard. For a nominal 6&39; 8" opening, you need a finished height of 6&39; 8 3/4" (80 3/4").
Contact Us
